Are you having issues logging into your TP-Link extender device? Lost the administrative password? Are you unable to log in to the TP-Link extender? If so, you will probably need to Factory reset TP-Link Range Extender default settings. If you don’t know the steps then don’t panic! We are here to help you. Here, in this article, you will get to know the step-by-step instructions for a Reset TP Link extender. Let’s go ahead. 


An TP-Link range extender is an ultimate device that enhances wireless signal quality, extended wireless network connectivity, and fixes issues associated with the TP-Link extender device. The small-sized wall socket is installed in the home or office for transmitting wireless signals.


Steps For TP-Link Extender Reset

TP-Link provides some instructions here on how to reset the TP-Link range extender without causing any issues. There are two methods that are used for Factory reset TP-Link Range Extender that are described below. 


Method 1: Factory Reset of TP-Link WiFi Range Extender from Software

Go through the below steps for TP-Link WiFi range extender by using the software:

Step 1: The first step is to plug the TP-link range extender into an electrical outlet. Make sure that your device is connected via WiFi to the extender as well.

Step 2: Next, log in using the IP address that you entered during the initial configuration of the TP-Link range extender device or the default IP address

Step 3: Click on the settings and go to the system tools.

Step 4: On the left panel, click Backup and Restore.

Step 5: Click on Factory Reset to perform a factory reset TP-Link WiFi range extender.

Step 6: After that, a message will pop up asking, “Are you sure about the factory default settings?” Tap on the yes to continue.

Step 7: After the reboot, your TP-Link range extender will be reset to its factory default settings. Change the name of your WiFi device.

Step 8: To confirm that the wireless booster device factory reset has been successful, you need to check the wireless signals.

Step 9: Lastly, you need to configure the TP-Link extender device to achieve a longer range of wireless signals.

Method 2: Hard Reset of TP-Link WiFi Range Extender

It is used when users forget the login credentials details of the TP-Link WiFi range extender after completing the setup process. This includes the username, password, and IP address of the TP-Link extender. Follow the below steps to complete the hard Reset Factory TP-Link Range Extender.

Step 1: Plug in your TP-Link range extender at the wall outlet.

Step 2: After that, turn on your TP-link extender device.

Step 3: Press the reset button on the back of the TP-link extender device with the paper clip, needle, or any other sharp object.

Step 4: Next, press the reset button for some time to reboot the range extender.

Step 5: Now wait a while until the extender device has rebooted 

completed. Ensure that the wireless signals display the default SSID name.

You may be experiencing issues with your TP-Link range extender, and you may be trying various solutions to resolve TP-Link range extender reset problems. Some issues, however, are insurmountable because it is impossible to determine the root of the problem. We hope that the above-mentioned details will help you in resolving the problem with your Factory reset TP-Link Range Extender.