When you purchase a router, the company sets it to default factory settings. These settings remain the same for every device. The default Linksys IP address is 192.168.1.1. This is the default IP address for most of the routers. They use the same address so that it is accessible easily, you do have the option of configuring the device later according to your requirements. You require the IP address when you want to access the router settings or reset it. Linksys IP address default settings becomes important while installing it or connecting it to other devices. The default credentials are for the easy access but since they are known to
everyone, it is best that you change the credentials while installing the router. It will provide you that extra layer of security and you can avoid unwanted access to
your device. You can enter the default IP address and navigate to settings to configure the router. If you have any trouble while setting up the router, you can
perform a reset function. Let’s see how you can reset the router and access the settings using the default IP address.
How to reset Linksys router?
In order to reset, you need to know the current credentials of your Wi-Fi network. Your device would be offline, till you perform the reset. Let’s take a look at the steps for Linksys reset re6300.
Locate the Reset button on your device. Depending on the model number you are using, it may vary where it is located.
Press and hold the reset button for at least 10 seconds.
This would reboot the device and perform a factory reset. Another way to Reset Linksys range extender:
Establish a connection to your Wi-Fi network.
Open a web browser.
Now type 192.168.1.2 in the URL section or type extender. Linksys. Com.
Enter the default credentials.
Now, click on restore factory default button.
The above mentioned methods will help you resolve Linksys router problems. Sometimes your router stops working and is unable to connect to the network. It may face issues connecting to other devices, in that case you can enter Linksys router log in IP and perform a reset. This is the most common and reassuring way to resolving the issue. There are other troubleshooting ways too, like fixing a faulty Ethernet cable. Check the network and security settings of the router. Make sure all the cables and wires are plugged in properly. There might be an internet connectivity issue. Check for any updates and ensure that all your devices are updated.