Under normal circumstances, after the battery powered gps tracker confirms that the power is turned on, the red indicator light usually flashes for tens of seconds to five minutes, and then the red indicator light will turn to the steady light mode, which means that the battery powered gps tracker is powered normally and the GSM signal channel is normal. . But occasionally, after the battery powered gps tracker is powered on for five minutes, the red indicator light does not turn to the steady-on mode, but flashes slowly and quickly, which means that the SM signal channel is faulty.

If the red indicator light of the battery powered gps tracker flashes quickly, we need to check two situations. The first situation needs to check whether the built-in IoT traffic card of the battery powered gps tracker is in normal communication and whether there is any downtime and traffic. Excessive, in special cases, the physical damage of the IoT traffic card will also occur; the second need to check whether the GSM built-in antenna or external antenna has fallen off and damaged.

If the red indicator of the battery powered gps tracker flashes slowly, usually, we also need to do two investigations. First, we need to check whether the data transmission and reception of the target IP server of the battery powered gps tracker is normal. The second is to check whether the target server has added the device ID number (which can be found on the body and box).

The last situation is irregular flickering, which is less likely to happen. The main reason is that the LED particle lights on the built-in PCB of the battery powered gps tracker are soldered, which is often referred to as poor contact. At this time, it is necessary to Contact the manufacturer to replace a new battery powered gps tracker.

battery powered gps tracker https://www.eelinktracker.com/battery-powered-gps-tracker-for-car-gpt46.html