ATT router is one of the most reliable and best selling routers in the market. They are user friendly and easy to access. Logging in to your ATT router is simple. Setting up the device yourself is much more convenient and straight forward rather than waiting for a technician to arrive for every single issue or work that needs to be done. You can refer to the manual you must have received while purchasing the router on how to access ATT router. Let’s have a look at the steps for the same. You have to go to a device that is connected to the router to navigate to router settings ATT. Then follow the steps mentioned below.
Steps to access ATT router:
Ensure that you are connected to your ATT router.
Open your web browser and type 192.168.0.1
Now, enter the username and password for your ATT router.
ATT router access code in default settings are - password : admin username : admin
Log in to your router and change the settings as you require.
You can complete ATT router access by entering the default credentials. When you reset the router its settings will change into default settings which are known to all and therefore not necessarily safe. In order to protect your connection you must change the username and password by logging in through default credentials. Type 192.168.0.1 in the URL section of the web browser and you will be directed to the login page.
If you are having any trouble with your router or unable to access to the internet due to some issue. Simple trouble shooting can help you resolve many issues but sometimes faulty connection like loose wiring and not plugged in properly can
cause the malfunction. Try turning the Wi-Fi Off and then back on. This usually resolves the issue. Make sure you have a strong Wi-Fi signal. Try moving closer to the Wi-Fi and check your equipments. Resetting the router resolves the issue in most of the cases. Let’s have a look at the process of ATT reset router.
Steps to reset ATT router:
Press and hold the reset button on the gateway for 10 seconds.
Make sure you hold it otherwise the router will reboot and nor perform a reset.
Wait till the status lights are on.
If the broadband or the service status light turns green, the router settings ATT are now at its default.
You can enter through the default credentials after that and modify the settings of the router.