Users have recently been reporting a lot of problems with Canon Printer Error 6800, which prohibits them from printing and using the printer. As a result, we've put together this comprehensive guide to assist you in Canon Printer Error Code 6800 Solution fully addressing this issue by implementing the appropriate remedies. To gain a better understanding of why the appropriate remedy is being deployed, read through the reasons why this mistake happens in the first place. You ensure thorough eradication of the bug, make sure to follow the steps exactly and read the entire guide.

Canon Printer Error 6800: What Causes It?

We decided that the following are some of the most important reasons for the occurrence of this error after going over some basic troubleshooting techniques Canon Printer Error Code 6800 Solution. The following are the two main reason for this error code occur

General Glitch: The Error 6800 can arise as a result of a general glitch that stops the printer from properly loading its configurations. As a result, a simple restart, as described in the procedures below, might occasionally resolve the problem.

Debris: It's conceivable that some debris has accumulated inside the printer over time, preventing it from correctly moving its mechanical parts and causing this error to appear while trying to print. As a result, cleaning the printer thoroughly as described in the remedy below can help you overcome this problem.

 

Now that you've learned about the most common causes of Error 6800 on Canon printers, it's time to implement ways to fix the problem.

 

How to Repair Canon Printer Error 6800

Solution 1: Restarting the printer

  1. To turn the printer "OFF," first push and hold the power button for 3-4 seconds.
  2. After that, unplug the printer's power supply and wait for about three to four minutes.
  3. After the waiting period has passed, reconnect the power source and turn your printer "ON."
  4. To see if the error 6800 is fixed, use the printer right now.

Solution 2: Reset The Printer

  1. Begin by resetting your printer as instructed in "Solution 1."
  2. Then choose "General Tools Software" from the drop-down menu.
  3. Then, to complete the Resetting operation, locate the USB port and select "Set Destination 1."
  4. Finally, reconnect your printer to see if the Canon printer error 6800 has gone away.

Solution 3: Restart Your Printer (Alternate Method)

  1. Connect the power source to your printer and turn it on.
  2. Hold the "Reset/Stop" button for nearly seven to nine seconds after that.
  3. Now hold down the Reset button while simultaneously pressing and holding the Copy button for about five to six seconds.
  4. Then, first, release the copy button, and then the reset/stop button.
  5. Now that the printer has been reset, try using it.

Solution 4: Use the Repairing Tool

  1. To use a repairing tool, you must first download it if you haven't previously done so.
  2. After the download is complete, follow the on-screen directions to install the program.
  3. Now open the software and select "Scan" from the menu. Keep holding on for a few seconds until the scan is completed.
  4. When the scan is finished and the errors are displayed on the screen, select "Fix Errors."
  5. Finally, restart your computer and printer to verify whether the Canon 6800 printer problem has been resolved.

Solution 5: Unplug the printer and clean it

  1. Remove the printer's cover and inspect it for any foreign objects, such as a paper pin or dirt.
  2. If you come across anything superfluous or strange, simply remove it before removing the cartridge.
  3. Remove the ink cartridges from the print head and soak a cotton swab in hot water.
  4. Clean each ink cartridge and print head, then set the clean cartridges and print heads away to dry for a bit.
  5. Replace all of the components in their original placements and close the lid once they have dried.
  6. Check to check if the error: 6800 has been resolved by turning on the printer.

Solution 6: The Logic Board Must Be Replaced

When a malfunction in the logic board occurs, this type of error happens. If this is the case, the problem can be resolved by replacing the defective logic board with a new one. This type of repair is typically not possible at home, therefore having the printer serviced is the best alternative.

Solution 7: Contact the Canon Service Center for assistance.

There's a good chance the printer's internal components have been damaged, or the software has been corrupted. To fix this, go to your nearest "Canon Service Center" and request that your printer be repaired.

Solution 8: Make a Warranty Claim

The majority of Canon printers come with a nearly one-year warranty. You have the right to a warranty if the printer is not damaged on the outside or if it has not been opened. To claim a warranty, you'll need proof of purchase, which will entitle you to service or replacement. Even if the warranty period has expired, you can still apply for the "Canon Upgrade Program," which allows you to replace an old or malfunctioning printer with a new one.