Netgear routers are one of the best-selling routers in the market. They are user friendly and you can opt for self-installation while purchasing the router. To setup the router, you must know how to access Netgear router. Your Netgear router log in allows you to set up and secure your wireless network. You may require doing this for multiple reasons since routers provide us with a Wi-Fi access point. They do come with USB ports for printers and drives so that you do not have to make any cross connections to do the job. You can simply access all those things from the router directly for internet services. Since most of the devices these days do require an internet connection to work, these features in routers come in handy where you can connect your other devices either through the cable or wirelessly. These functions do need access, so here’s a guide for Netgear router access. Follow the steps mentioned below.

Steps to access Netgear router:

 Connect to your wireless network using the Wi-Fi or you can use the Ethernet cable.
 Open the web browser and type
 Now, enter your Net gear username and password to access router remotely.
 In case you haven’t changed, default username and password are, username: admin, password: password.
 You should be able to log in to your router and carry out the task.

This will allow you to login to your router ans modify the settings. But sometimes you face issues like This device is blocked by access control in the router Netgear. This will disable the access control and create networking error. In order to resolve the problem you can reset the router back to factory default settings. The process will eliminate any error the router might be facing. Let’s have a look at the steps for the same.

Steps to reset Netgear router:

 Locate the reset button on the router. It is usually present at the rear end on the back of the router.
 Press and hold the reset button for 15-20 seconds.

 Release the button when you see the lights on the router are stable.
 The router will take a few minutes and set back to default settings.
Thereafter, you can login to your router using the default credentials. The
Netgear default Wi-Fi password is admin. Enter the same in the login page and
click ok. This will navigate you to the settings of your router.