The air box pulse bag filter is an improved new high-efficiency air box pulse bag filter based on the bag filter. In order to further improve the air box pulse bag filter, the modified air box pulse bag filter retains the advantages of high purification efficiency, large gas processing capacity, stable performance, convenient operation, long filter bag life, and small maintenance workload.
In addition, the reform in structure and pulse valve solves the problems of open air installation and low pressure of compressed air source.
Working principle of air box pulse bag filter
The air box pulse bag filter is composed of an ash hopper, an upper box, a middle box, a lower box, etc. The upper, middle and lower boxes are of sub-chamber structure. When working, the dust-laden gas enters the ash hopper from the air inlet duct, the coarse dust particles fall directly into the bottom of the ash hopper, and the fine dust particles enter the middle and lower boxes upward with the turning of the airflow. The dust accumulates on the outer surface of the filter bag, and the filtered gas enters the upper box to the exhaust duct of the clean air collecting pipe, and is exhausted to the atmosphere through the exhaust fan. The cleaning process is to first cut off the clean air outlet air duct of the chamber, so that the cloth bag of the chamber is in a state of no airflow. Then open the pulse valve and use compressed air for pulse blowing to clean the dust, and the shut-off valve is closed for a time sufficient to ensure that the dust stripped from the filter bag after the blowing settles to the ash hopper. This avoids the phenomenon that the dust is attached to the surface of the adjacent filter bag with the airflow after it leaves the surface of the filter bag, so that the filter bag can be cleaned thoroughly. And the programmable controller can fully control the exhaust valve, pulse valve and ash discharge valve.
Air box pulse bag filter features
1. The air box pulse bag filter adopts the sub-chamber air-stop pulse jet cleaning technology, which overcomes the shortcomings of the conventional pulse dust collector and the sub-chamber back-flushing dust collector. Strong ash cleaning ability, high dust removal efficiency, low emission concentration, low air leakage rate, low energy consumption, low steel consumption, small footprint, stable and reliable operation, and good economic benefits. It is suitable for the purification of dusty gas and the recovery of materials in metallurgy, building materials, cement, machinery, chemical industry, electric power and light industry.
2. Due to the use of sub-chamber air stop pulse jet to clean the dust, the purpose of complete dust removal can be achieved by one injection, so the dust removal cycle is prolonged, the energy consumption of dust removal is reduced, and the consumption of compressed air can be greatly reduced. At the same time, the fatigue degree of the filter bag and the pulse valve is correspondingly reduced, thereby multiplying the life of the filter bag and the valve plate.
3. The maintenance and replacement of bags can be carried out in separate rooms under the normal operating conditions of the system without stopping the system fan. The mouth of the filter bag adopts an elastic expansion ring, which has good sealing performance and is firm and reliable. The filter bag keel adopts polygonal shape, which reduces the friction between the bag and the keel, prolongs the life of the bag, and facilitates the unloading of the bag.
4. The upper bag extraction method is adopted. After the skeleton is pulled out when changing the bag, the dirty bag is put into the ash hopper at the lower part of the box and taken out from the inlet hole, which improves the operating conditions of bag changing.
5. The box body is designed with air tightness, which has good sealing performance. The inspection door uses excellent sealing materials. During the production process, kerosene is used to detect leakage, and the air leakage rate is very low.
6. The inlet and outlet air ducts are compactly arranged, and the airflow resistance is small.
Air box air box pulse bag filter exporter
The air box air box pulse bag filter manufactured by Yushun is at an advanced and efficient level. It combines the advantages of chamber blowing and jet pulse cleaning of various baghouses, overcomes the shortcomings of insufficient chamber blowing and cleaning strength, jet pulse dust removal and filtration are carried out at the same time, thus expanding the application range of baghouses . Since the structure has the characteristics of this type of filter, the dust removal efficiency is improved and the service life of the filter bag is prolonged.