The hp envy 4520 dpi can print, copy, and scan documents. It has a 100-sheet input tray and can print in Duplex and Borderless modes at the same time. It prints black at a speed of 9.5 pages per minute and color at a speed of 6.8 pages per minute.

This printer can print at a resolution of 4800 x 1200 dots per inch (dpi). This printer has a maximum print size of 8.5 x 14 inches." This printer also offers a scan resolution of 1200 x 2400 dpi, which is exceptionally high for a laser printer. It has an "LCD with a single touchscreen," according to the printer's 2.2 ratings. A cable network or a wireless network are both options for connecting your HP Envy 4520 dpi to a computer.

Detailed instructions for personalizing an HP Envy 4520

1. The ways for configuring your HP Envy 4520 dpi are as follows:

1. Take the HP Envy 4520 printer out of the box and set it aside.
2. Remove the printer's covers one at a time.
3. Make sure your envy printer is close to a power outlet before you begin.
4. To connect the printer to the power socket, you'll need a USB cable.
5. Before you can switch on the printer, you must first turn on the power outlet.
6. Please go to the printer's settings once you've turned on the printer and started printing.
7. Make the necessary adjustments to have access to the cartridge slots after that
8. Ink cartridges should be replaced in the printer's authorized locations.
9. Place the desired number of sheets in the printer's input tray.
10. Create a wireless network between the computer and the printer to make file sharing and printing preferences easier.
11. The manufacturer's website has the necessary driver software that can be downloaded and installed
12. To ensure that the hp envy 4520 dpi is accurate, print a piece of paper.

Download and install the HP Envy 4520 driver.

HP printer drivers are required for the printer to function properly. If your printer has a driver that is compatible with it, you can print with all advanced capabilities enabled. You must install the driver regardless of the model of your HP printer. The download and installation of the HP Envy 4520 dpi for Windows and Mac is straightforward.

Download and install the HP Envy 4520 driver on your Windows PC.

The instructions below will walk you through the steps to download and install the HP Envy 4520 driver for Windows: Step 1: Download and save the HP Envy 4520 driver to your computer's hard drive.

1. Install the HP Envy 4520 driver for Windows on your PC.
2. Double-click the downloaded driver after navigating to its location.
3. After that, you may start the driver installation process.
4. Installing the driver is as simple as running the setup application.
5. During the driver installation, make sure you choose the connectivity setup technique.
6. Last but not least, load some paper into the printer and print a page.

The HP Envy 4520 driver for Mac OS X is now available.

1. How to install the HP Envy 4520 dpi on a Mac is outlined below:
2. Install the HP 4520 driver on your Mac computer.
3. Then follow the installation instructions to get the driver up and running.
4. To install the driver, follow the wizard's instructions.
5. During the envious driver's structure, make sure the network configuration technique is picked.
6. Navigate to the location of a file on your device.
7. Finally, put paper in the hp envy 4520 dpi tray and print a document from your computer.

The HP Envy 4520 Wireless Printer is configured.

In only a few minutes, you can set up a wireless network for your HP Envy 4520 dpi.

Intelligent Application from HP

1. The instructions for configuring the wifi on the HP Envy 4520 can be found in the section below:
2. Download and activate the HP Smart App to begin the software installation process.
3. Keep following the wizard's directions.
4. The software should then be downloaded, installed, and launched.
5. Make the necessary adjustments to the HP Smart App.
6. Connect your Envy printer to the HP Smart App using the USB cable.
7. Complete the wireless network configuration procedure.

Wizard for configuring a wireless network

To connect your HP Envy 4520 dpi to a wireless network, follow these steps:

1. Navigate to the printer's wireless network configurations.
2. You'll be sent to the wifi setting wizard by clicking the link.
3. A list of currently available wifi networks will appear on your envy printer.
4. Follow the wizard's steps to connect to your wifi network.
5. After that, finish configuring the wireless network on the HP Envy 4520.
6. Finally, you must print a test document.

HP Envy 4520 Printer Troubleshooting

The HP Envy 4520 printer is not printing correctly.

1. If your printer won't print, use the steps below to diagnose and fix the issue.
2. To begin, connect your computer to your printer.
3. Check the printer's wifi network to see if it's up and running.
4. Then, using your computer, make sure the wifi network is up and running.
5. Make that the printer and the computer are both connected to the same wireless network.
6. Verify that your printer's firmware is up to date at this point
7. Verify that the printer's settings are right.
8. Finally, use your own printer to print.
9. If your printer is not working properly, please do not hesitate to contact us.