Apple is undoubtedly one of the most esteemed brands in the market. They manufacture variety of products including routers. Apple routers are generally referred to as Apple Airport. They are high-quality device that provides great internet connectivity and an error free experience. Apple Airport time capsule is a two in one device. It provides access to high speed internet connection. It does not consume much data. Time capsule is not exclusive to Apple devices. It works well with Android devices as well. You can setup Airport Time capsule setup by yourself through following some simple steps. Let’s have a look at the steps. You can navigate to settings to setup Apple Airport time capsule. It is a wireless device therefore you do not need an Ethernet cable to connect your devices to the router. You simply have to enable the settings and connect your devices through entering the password.

 
 
 

Steps to setup Airport Time Capsule:

 
  •  

  •  First, you have to plug the time capsule into a power outlet. You will see

  • the lights on the router blinking. When the light are stable and blue, it is ready to be configured.

  •  Now, plug the Ethernet cable in the time capsule.

  •  Plug the other end of the cable in the modem which you must have received from your local ISP. This will allow the time capsule to access the internet from the device.

  •  Then, you have to download the Apple Airport utility app from Apple store

 
 

 Follow the on-screen instructions to complete the setup. Then, open the Airport utility app. It will automatically scan for wireless network. Connect to the wireless network by clicking on the icon.

 Follow the instructions and complete the setup. You will see the lights on

the router turn green when setup is complete.

Follow the steps as mentioned above to complete Apple Time capsule setup.

Thereafter, you can connect your device to the Airport base station to setup the

Airport utility. One of the common issue that users face is Apple router blinking orange. The

blinking light may be caused because device may be new and hasn’t been configured or setup properly yet. The Ethernet cable used to connect two devices has not been plugged properly. Another reason can be lost The connection between router and modem has been lost. The blinking orange light is also caused due to the lost connection between the router and the modem. Let’s have a look at some of the troubleshooting steps to fix the error.

Ways to fix Blinking orange light on Apple router:

  •  Access the Apple Airport base station and launch the Airport Utility.

  •  All the cables and wires should be plugged in properly.

  •  If you are using an extender, move it closer to the Wi-Fi.

  •  Restart the modem and perform the power cycle.

  •  Reset the Apple Airport back to factory default settings.

  •  Contact your ISP and check if the server is down in your area.

These steps should resolve the issue and restore the router back to proper working. If not, contact a technical expert for a guided solution.

Source