The classification of cellulose filter cartridge can be divided into the following eight categories

①cellulose filter cartridge dust removal efficiency: high efficiency of cellulose filter cartridge is one of the most important performance indicators to choose. The gas flow in a certain state, specific dust pollutants, and the state of the gas have a direct impact on the capture efficiency.

②Operation flexibility: For any operating equipment, its load and the impact on the capture efficiency when the airflow exceeds or falls below the design value must be considered. It is also necessary to grasp that the dust concentration is unstable or continuously higher than the design value. how to behave when the value is set.

③ Hydrophobicity: The purification efficiency of the cellulose filter cartridge for hydrophobic dust is not high, and it is generally not suitable for how to operate the design value.

④Cohesiveness: The cellulose filter cartridge can purify the cohesive dust, but flushing and cleaning should be considered to prevent clogging.

⑤Corrosion: Anti-corrosion measures should be considered when purifying corrosive gases. ⑥Water consumption: the amount of water consumed by the dust collector and the treatment of the discharged sewage, and the antifreeze measures for water in winter.

⑦ Mud treatment: Mud treatment is an inevitable problem encountered by cellulose filter cartridges, and efforts should be made to reduce the harm of pollution.

⑧Operation and maintenance of cellulose filter cartridge: Generally, there should be no moving or rotating parts inside the dust collector. Note that the gas passing through the flow channel section is too small to cause blockage

cellulose filter cartridge https://www.kaisenfilter.com/Cellulose-Filter-Cartridge