Automatic screw feeding machine material selection function

The automatic material selection function is an important part of the feeding mechanism of the automatic screw feeding machine. It is also the basis for realizing the high speed and stability of the screw machine and the completion of the locking and paying tasks with high standards. How to test the feeding system of the automatic screw feeding machine in case of defective products and other phenomena

1. Grab a bunch of messy screws, including flashing, flat-headed, impurity-containing special-shaped screws that do not meet the specifications, and put them in the hopper. If the screw machine can automatically arrange these special-shaped screws, there will be no jamming.

2. Check whether there will be floating teeth: In order to make the special-shaped screws pass smoothly, some people will make all channels larger, which will cause poor positioning, floating teeth, and increase defective products.

3. Check whether there is a gap, after the feeding mechanism screens the bad screws. If the system can replenish in time, there will be no gap.

In addition, when purchasing a hand-held automatic screw feeding machine, you should also pay attention to the phenomenon of repeated feeding. The hand-held automatic screw feeding machine produced by Dongguan Gewei Electronics Co., Ltd. can send screws, lock and pay in one go, no longer need to take screws by hand. Aim directly at the position of the screw hole, lightly press the screw to lock, no repeated feeding phenomenon, lock one by one.

The above is the inspection of the automatic screw feeding machine feeding system. It is a step that cannot be ignored in the acceptance of the equipment. The Gewei automatic screw feeding machine has good performance and stable operation, replacing manual work and saving manpower for enterprises.