Introduction of electrolyte ton barrel
The electrolyte ton barrel has the advantages of sanitation, pressure resistance, anti-corrosion, and pressure discharge. This series of products are widely used in pharmaceutical, food and fine chemical industries. This electrolyte ton bucket is made of corrosion-resistant and acid-resistant SUS316L and SUS304 stainless steel materials. Fully automatic argon arc welding machine is used for welding, the weld seam is beautiful and clean, without welding lumps, welding slag, and pores, and the tightness is relatively good.
The electrolytic polishing process developed by Procon Precision can completely remove the blue and red spots of the weld seam produced during the welding process inside the container, which essentially solves the problem of the smoothness of the barrel, allowing the weld seam and the barrel body to reach a mirror surface at the same time The effect ensures that the product can be used safely for a long time.
Electrolyte is the medium used in chemical batteries, electrolytic capacitors, etc., and its representative content varies greatly in different industries. There are electrolytes (also called electrolytes) in living organisms, electrolytes used in the battery industry, and electrolytes in electrolytic capacitors, Supercapacitors and other industries.
The role of electrolyte
There are many advantages to using electrolyte as cathode. First of all, the contact area between the liquid and the medium is larger, which helps to increase the capacitance. The second is the electrolytic capacitor made of electrolyte, which can withstand high temperature, so that it can pass wave soldering, and at the same time, it has relatively strong pressure resistance.
An electrolytic capacitor using electrolyte as the cathode, when the dielectric is broken down, as long as the breakdown current does not continue, the capacitor can self-heal. But electrolyte also has its disadvantages. First of all, it is easy to volatilize and leak in high temperature environment, which has a great impact on life and stability. Under high temperature and high pressure, the electrolyte may vaporize instantaneously, and the volume increases to cause explosion; secondly, the ion conduction method adopted by the electrolyte, Its conductivity is very low, only 0.01S/CM, which causes the ESR value of the capacitor to be particularly high.
Precautions for Electrolyte
During the electrolytic polishing process, the iron and chromium elements contained in the stainless steel workpiece as the anode are continuously transformed into metal ions and dissolved in the polishing solution without depositing on the surface of the cathode. Before the stainless steel workpiece enters the polishing tank, the moisture remaining on the surface of the workpiece should be removed as much as possible. Excessive moisture in the workpiece may cause serious pitting on the polishing surface, and local corrosion will cause the workpiece to be scrapped. As the polishing process progresses, the concentration of metal ions increases continuously. When it reaches a certain value, these metal ions are continuously precipitated from the polishing solution in the form of phosphate and sulfate, and settle at the bottom of the polishing tank. For this reason, the polishing liquid must be filtered regularly to remove these solid deposits.
During the operation of the polishing tank, in addition to the continuous consumption of phosphoric acid and sulfuric acid, water is lost due to evaporation and electrolysis. In addition, the high-viscosity polishing liquid is continuously lost by the workpiece, and the liquid level of the polishing liquid continues to drop. It is necessary to frequently add fresh polishing to the polishing tank. liquid and water
The discharge after neutralization meets today's environmental protection requirements.
Electrolyte is corrosive, keep out of eyes, mouth and skin. In case of accidental contact, rinse with clean water immediately. In severe cases, seek medical treatment for strong acid burns; keep in a sealed and cool place for long-term effectiveness. The electrolyte ton barrel can pack this corrosive electrolyte, which can avoid contact with the human body and cause harm to people. It is safe and convenient to use the electrolyte ton bucket.