https://www.pytesess.com/industry/48v-lfp-battery-voltage-range.html
The voltage range of an LFP battery usually refers to its rated voltage and operating voltage range. For a 48V LFP battery, its rated voltage is generally 48V, and the operating voltage range includes the lowest and highest voltages of the battery. These two aspects will be introduced in detail below.
The first is the rated voltage
Rated voltage refers to the voltage of the battery under standard operating conditions. For a 48V LFP battery, the rated voltage is 48V. This means that under normal operating conditions, the voltage of the battery should always be maintained at around 48V. When the voltage of the battery is lower or higher than the rated voltage, the performance and life of the battery may be affected
Secondly, the operating voltage range
The operating voltage range refers to the lowest and highest voltage at which the battery can work normally. For a 48V LFP battery, the operating voltage range is usually 42V to 54V. When the battery's voltage is lower than the minimum voltage, the battery may not work properly or its performance may decrease; and when the battery's voltage is higher than the maximum voltage, it may cause the battery to overcharge, thereby damaging the battery's safety performance and lifespan.
In practical applications, in order to ensure the safety and performance of the battery, battery protection measures are usually set. One of the common protection measures is the battery management system (BMS), which can monitor the voltage of the battery and perform protection operations according to the set threshold value. When the battery voltage is lower than or higher than the set threshold value, BMS will take corresponding measures, such as cutting off the battery output or charging circuit, to protect the safety of the battery and extend the life of the battery.
Pytes reminds you that when selecting and using a 48V LFP battery, you should read the battery specifications carefully to understand its specific voltage range requirements and make a selection based on actual needs.