Vertical and horizontal CNC rotary table GTR200

https://www.qkznmach.com/GTR200.html

Disk diameter φ200mm
Center height 160mm
Center aperture φ60H7mm
Through aperture φ60mm
T-slot width 12H7mm
Positioning key width 18h7mm
Reduction ratio 1:36/50
Maximum speed 83/60r.p.m
Minimum setting unit 0.001deg
Cutting accuracy ±10sec
Repeatability 4sec
Lock the power source pressure:
Oil pressure,air pressure 2±0.5/0.5MPa
Maximum cutting torque (brake) 400/115Nm
Allowable inertia capacity 0.85Kg.m²
weight 80Kg
Vertical and horizontal CNC rotary table GTR200 https://www.qkznmach.com/GTR200.html Disk diameter φ200mm Center height 160mm Center aperture φ60H7mm Through aperture φ60mm T-slot width 12H7mm Positioning key width 18h7mm Reduction ratio 1:36/50 Maximum speed 83/60r.p.m Minimum setting unit 0.001deg Cutting accuracy ±10sec Repeatability 4sec Lock the power source pressure: Oil pressure,air pressure 2±0.5/0.5MPa Maximum cutting torque (brake) 400/115Nm Allowable inertia capacity 0.85Kg.m² weight 80Kg
0 Comments 0 Shares