arc blade hedge trimmer is a common mechanical equipment which is widely used in cutting garden, lawn and other fields. The service life of the arc blade hedge trimmer is closely related to the performance of the blade, so the correct use and maintenance of the blade is particularly important. In this article, we will introduce the use of arc blade hedge trimmer blade and maintenance methods, I hope to help you.

First, the use of the blade

1. Blade assembly

Before using the arc blade hedge trimmer, we need to assemble the blade. Usually the blade needs to be secured with screws. During installation, align the blade with the bayonet, insert the blade into the slot in the middle of the tool head, and then use a tool such as a screwdriver to tighten the blade.

2, blade use

In actual use, we need to pay attention to the following points:

(1) Avoid stress

When using an arc blade hedge trimmer to cut lawns and shrubs, try to avoid heavy pressure. Because excessive force may cause damage to the blade, and even lead to reduced cutting performance.

(2) Maintain the Angle

When cutting grass or shrubs, pay attention to the Angle of the blade. If the blade Angle is too inclined, it will be more likely to be damaged than the tool face, so it is necessary to try to keep the blade level or tilt Angle not more than 45 degrees.

(3) Avoid contact with hard objects

When cutting, you should avoid hard objects, such as stones. Because this will lead to the blade passivation, fracture and other phenomena.

Two, blade maintenance methods

blade maintenance and lubrication are also important factors to ensure the proper operation of the arc blade hedge trimmer. Here are some common maintenance methods:

1. Clean

After the lawn or shrub is mowed, carefully clean the blades. The blade will be attached to grass, leaves and other debris. If you do not clean the blade in time, the service life and performance of the blade may be affected. Use a soft cloth to wipe the blade.

2. Lubrication

Another important maintenance work is lubrication, the blade should be lubricated so that it can be used normally. Take care to choose the right lubricating oil.

3. Storage

When the blade is not used for a long time and needs to be stored, pay attention to the storage environment. Store the blades in a dry, ventilated place. Remove the blade during storage, clean it, and apply maintenance oil to prevent corrosion and rust.

In short, when using and maintaining arc blade hedge trimmer blades, we need to avoid blade collision and pressure as much as possible, and timely cleaning and lubrication to ensure that it is in good performance. With proper use and maintenance, we can extend the service life of blades, reduce damage rates, and facilitate lawn and shrub pruning.

arc blade hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Arc-Blade